AMC 150 I4¶
The 2.5L inline 4 (I4) engine used in Jeeps today was first introduced in '84 when Jeep was owned by AMC. Originally, the engine used a carburetor, later versions used throttle body fuel injection, and the current version uses multi-port fuel injection. The fuel induction has been the major change with this engine over the years. The 2.5L uses overhead valves with hydraulic lifters and a cast iron block and cylinder head.
The current version of the 2.5L I4 engine uses multi-port fuel injection. This engine is the standard engine used in the Wrangler (TJ) and Cherokee (XJ). It has been the standard engine in the Wrangler (YJ) since 1991. The XJ version of the 2.5L has a slightly higher output.
| Attribute | Specification |
|---|---|
| Bore x Stroke | 3.88" x 3.19" |
| Displacement | 150ci (2.5L) |
| Compression Ratio | 9.1:1 |
| Horsepower (net) | 123@5250 |
| Torque (net) | 139@3250 |
| Main Bearings | 5 |
| Valve Configuration | OHV |
| Fuel | MPI |
The TBI version of the 2.5L was used in '87-'90 Wrangler YJs.
| Attribute | Specification |
|---|---|
| Bore x Stroke | 3.88" x 3.19" |
| Displacement | 150ci (2.5L) |
| Compression Ratio | 9.2:1 |
| Horsepower (net) | 117@5000 |
| Torque (net) | 135@3500 |
| Main Bearings | 5 |
| Valve Configuration | OHV |
| Fuel | TBI |
This carbureted version of the AMC 150 I4 was introduced as the standard engine in '84-'86 CJ-7s.
| Attribute | Specification |
|---|---|
| Bore x Stroke | 3.88" x 3.19" |
| Displacement | 150ci (2.5L) |
| Compression Ratio | 9.2:1 |
| Horsepower (net) | 105@5000 |
| Torque (net) | 132@2800 |
| Main Bearings | 5 |
| Valve Configuration | OHV |
| Fuel | 1bbl |