Network resource modules¶
Ansible 2.9 introduced network resource modules to simplify and standardize how you manage different network devices.
Understanding network resource modules¶
Network devices separate configuration into sections (such as interfaces, VLANS, etc) that apply to a network service. Ansible network resource modules take advantage of this to allow you to configure subsections or resources within the network device configuration. Network resource modules provide a consistent experience across different network devices.
Network resource module states¶
You use the network resource modules by assigning a state to what you want the module to do. The resource modules support the following states:
- merged
Ansible merges the on-device configuration with the provided configuration in the task.
- replaced
Ansible replaces the on-device configuration subsection with the provided configuration subsection in the task.
- overridden
Ansible overrides the on-device configuration for the resource with the provided configuration in the task. Use caution with this state as you could remove your access to the device (for example, by overriding the management interface configuration).
- deleted
Ansible deletes the on-device configuration subsection and restores any default settings.
- gathered
Ansible displays the resource details gathered from the network device and accessed with the
gathered
key in the result.- rendered
Ansible renders the provided configuration in the task in the device-native format (for example, Cisco IOS CLI). Ansible returns this rendered configuration in the
rendered
key in the result. Note this state does not communicate with the network device and can be used offline.- parsed
Ansible parses the configuration from the
running_configuration
option into Ansible structured data in theparsed
key in the result. Note this does not gather the configuration from the network device so this state can be used offline.
Using network resource modules¶
This example configures L3 interface resource on a Cisco IOS device, based on different state settings.
- name: configure l3 interface ios_l3_interfaces: config: "{{ config }}" state: <state>
The following table shows an example of how an initial resource configuration changes with this task for different states.
Resource starting configuration |
task-provided configuration (YAML) |
Final resource configuration on device |
---|---|---|
interface loopback100
ip address 10.10.1.100 255.255.255.0
ipv6 address FC00:100/64
|
config:
- ipv6:
- address: fc00::100/64
- address: fc00::101/64
name: loopback100
|
|
|
||
|
||
|
Network resource modules return the following details:
The before state - the existing resource configuration before the task was executed.
The after state - the new resource configuration that exists on the network device after the task was executed.
Commands - any commands configured on the device.
ok: [nxos101] =>
result:
after:
contact: IT Support
location: Room E, Building 6, Seattle, WA 98134
users:
- algorithm: md5
group: network-admin
localized_key: true
password: '0x73fd9a2cc8c53ed3dd4ed8f4ff157e69'
privacy_password: '0x73fd9a2cc8c53ed3dd4ed8f4ff157e69'
username: admin
before:
contact: IT Support
location: Room E, Building 5, Seattle HQ
users:
- algorithm: md5
group: network-admin
localized_key: true
password: '0x73fd9a2cc8c53ed3dd4ed8f4ff157e69'
privacy_password: '0x73fd9a2cc8c53ed3dd4ed8f4ff157e69'
username: admin
changed: true
commands:
- snmp-server location Room E, Building 6, Seattle, WA 98134
failed: false
Example: Verifying the network device configuration has not changed¶
The following playbook uses the eos_l3_interfaces module to gather a subset of the network device configuration (Layer 3 interfaces only) and verifies the information is accurate and has not changed. This playbook passes the results of eos_facts directly to the eos_l3_interfaces
module.
- name: Example of facts being pushed right back to device.
hosts: arista
gather_facts: false
tasks:
- name: grab arista eos facts
eos_facts:
gather_subset: min
gather_network_resources: l3_interfaces
- name: Ensure that the IP address information is accurate.
eos_l3_interfaces:
config: "{{ ansible_network_resources['l3_interfaces'] }}"
register: result
- name: Ensure config did not change.
assert:
that: not result.changed
See also
- Network Features in Ansible 2.9
A introductory blog post on network resource modules.
- Deep Dive into Network Resource Modules
A deeper dive presentation into network resource modules.